The Pod can be installed on the dashboard or connected to the steering wheel. You can install both mounts and move the Pod back and forth based on driver preference. 

No tools are required and installation only takes a few minutes.

Dashboard Mount

Pick a flat, non-textured surface that is easy to reach while driving. 

1. Clean the surface to remove dust and ensure that the adhesive attaches.

2. Peel off one side of the double-sided tape on the bottom of the Dashboard Mount.

   

3. Apply the Dashboard Mount to the dashboard and press down for a few seconds.

   

4. Attach the Pod to the Dashboard Mount by fitting the hook on the Mount into the slot in the back of the Pod. Magnets hold the Pod securely to the Mount.

   

Steering Wheel Mount

1. Attach the Mounting Strap to the steering wheel.

2. Tighten the strap and use the Velcro hooks to secure the mount. Position the strap so that the Pod mounting surface faces the driver.

3. Turn the Mount so that the mounted Pod faces the driver.

           

4. Attach the Pod to the Steering Wheel Mount by fitting the hook on the Mount into the slot in the back of the Pod. Magnets hold the Pod securely to the Mount.

5. Place the POD with the Hook into the Pod slot

   

Recommendations:

• For Steering Wheel Mounting: Place the Pod sitting into the steering wheel as shown above to ensure minimal interference while driving. 
• Place it at the 7' clock position (lower left) to decrease interference when making U-Turns.
• Move the Steering Wheel mount to a different position to find what works best for you.